High-quality Ld Series Single-Channel Motor Driver for Guided Vehicle Robots (LDS15B60G)

Product Description

Product Description

Single Channel DC Servo Motor Driver LDS15B60G

LD series DC servo motor driver is a high-performance DC motor driver which has been introduced by senior experts after more than ten years of application experience in the robot industry, combined with leading motor control and current accurate detection technology. The powerful PID adjustment technology can perfectly control the motor's smooth forward and reverse rotation, commutation and braking. The output current can be adjusted in real time to prevent overcurrent. The motor speed and rotation position can be accurately controlled. The motor has a short response time and low recoil. We can provide 5A-200A high current, wide voltage input 12v-96v and other serialized products. This product is widely used in mobile cars, service robots, wearable exoskeleton robots and other products.

Product Parameters

 

Item	Data
Model	LDS15B60G
Rated Current	15Arms±1%
Maximum Current	30Arms±1%
Maximum Overload Time	20S
Overload Recovery Time	90S (without external heat dissipation)
Limit Power Supply Range	16 VDC~60 VDC
Temperature rise	Rated current operation 30min≤40K (refer to cooling mode)
Driving frequency	6 ~ 21KHz±0.1KHz
Cooling Method	The ventilation condition is good, and the installation surface needs to have some heat dissipation effect, such as iron plate, steel plate, etc.
Rated Insulation Withstand Voltage	The leakage current of input and output to chassis DC 1000V is less than 3mA,
Insulation Resistance of the Whole Machine	When the temperature is 40° and the humidity is 95%, ≥1M (no dew on the board)
Mean Time Between Failures (MTBF)	≥5000 hours
Power Control Method	Vector control
Protection Level	IP32

 

Product Advantages

  

* Flat, small size, wide voltage, light weight, high power density.

* Acceleration and acceleration mode control, fast positioning without shaking.

* Multiple hardware and software to protect the motor.

* Real-time reading current, speed, position.

  

RS485 Communication

The above figure shows the schematic diagram of Rs485 communication wiring.The communication line of Rs485 communication should not be run together with the high-voltage line or high-current power line.

 

CAN Communication

The above figure shows the schematic diagram of CAN communication wiring.It is recommended to use shielded twisted pair connection. Connect two 120Ω terminal matching resistors at both ends of the bus to prevent signal reflection.

Product Application

* Automatic Guided Vehicles;
* Small Electric Vehicles, Electric Bikes;
* Terrestrial and Underwater Robotic Vehicles;
* Hazardous Material Handling Robots;
* Balancing Robots;
* Telepresence Systems;
* Animatronics;

Product Series

Company Profile

 

Zhejiang Tongzhu Technology Co., Ltd founded 2015, in ZHEJIANG designs, manufactures and sells agv, driving wheel assembly, DC/AC motors, encoder, reducer, controller, caster wheel, gear, Pu wheel, motor in wheel units and all over the world.

TZBOT continues to bring excellent products, technological innovation and ease of customizing to the automated equipment.

The factory, is 1000 sq. feet, and employs 50 people. The company is certified to ISO9001:2015.

The core to TZBOT's growth is the constant dedication to the pursuit of full customer satisfaction. They have a strong presence in domestic and international markets, as well as, great production flexibility. TZBOT has come to be recognized as one of the biggest suppliers of electric drive.

Continued investment in the most modern machinery has further increased and developed the quality and flexibility of each product.

Today, TZBOT can quickly design and produce engines and special parts request from customers.

TZBOT's product are used in a myriad of application, including but not limited to: Forklifts, AGV, Aerial Platforms, Airport Machines, Agricultural Machines, Hydraulic Applications, Floor Scrubbers, Sweepers, Wind Energy, Marine, and in the field of Medical Devices.

All prototypes are tested for extended periods of time to verify the quality and the duration will work perfectly before sending production parts to customers. Due diligence is paramount to the satisfaction of our customers.
 

Certifications

 

FAQ

Q: Payment
A: Our payment is T/T, Paypal, West Union, Trade Assurance(Ali pay or E-check), L/C, and D/P.

Q: After-sale service
A: For assured quality all products, we check all products' quantity twice. The first time is end of production, the second time is before packing into cartons. If any negligence or accident about our goods, after received goods within 10 days, please don't worry to contact us at any time. We will reply you in 24 hours and let you choose solutions to meet your satisfactory.

Q: Our advantage
A: Free cameraman special for you: Supply high quality photos for you after ordered. Save tax: We can make C/O, Form E, Form-F and so on. They can help you save 10~30$ custom tax. Reduce freight rate: We compress beds, integration space and talk with express. Just for saving freight rate for customer. Usually, by the way, it can save about 20%~35% shipping cost. And we are trying to improve all the time. We have a professional technical team: We can provide a full range of pre-sale consulting and after-sale technical guidance.